| Type: | Fttr Ont |
|---|---|
| Wiring Devices: | None |
| Certification: | CE, ISO, RoHS |
1.PON: connect the OLT equipment at the source end through the optical fiber line
2.Ethernet port: connected to user side equipment through twisted pair network cable, lan1 port speed is 10 / 100 / 1000m,
adaptive, lan2-lan4 end Adaptive port rate of 10 / 100M
3.WiFi button: wireless routing function on / off
4.Power switch: power on / off
5.Power interface: connected to external power supply
|
ITEM
|
All-Optical Main Gateway-XGPON Combo FT3630X
|
|
Port
|
Uplink Port: XGPON Combo Interface line Rate: XGPON downlink 9.95328Gbps, uplink 2.48832Gbps;GPON downlink2.48832Gbps,uplink 1.24416Gbps; Downlink Port:1*GPON,1 * GPON, cascaded optical routing through splitters, can support up to 16 optical routing accesses. 4 * GE port, 1 * USB; AX3000 Dual band WiFi6(2x2MIMO); 1 * POTS voice port |
|
Port Working Wavelength of Xgpon Combo
|
Complies with ITU-T G.987/G.988 standards Central wavelength:XGPON downlink 1577nm ,uplink1270nm; GPON downlink 1490nm,uplink 1310nm |
|
Optical Interface Type
|
SC/UPC
|
|
Processor Capability
|
Dual Core 1G Hz
|
|
RAM
|
4Gbit SDRAM
|
|
Storage
|
2Gbit Nand Flash
|
|
EasyMesh
|
Support
|
|
VLAN
|
Support
|
|
Power Supply
|
Ac: Input 90 ~ 264V, 47 ~ 67Hz; Adapter output DC: 12V/2A |
|
Consumption
|
≤15W
|
|
Weight
|
≤0.7kg
|
|
Dimension(L*W*H)
|
240*160*41(cm)
|
|
Environmental Parameters
|
Operating Temperature:-5°C~45°C Storage Temperature:-40°C~70°C Relative Humidity:10%~90%,no condensation |
|
Button
|
Reset Button, WiFi Switch Button, WPS
|
|
ITEM
|
All Optical Main Gateway-FT3630X
|
|
|
WAN Connection
|
WAN working mode
|
Support routing working mode, bridging working mode, and bridging routing mixed working mode Support specifying different VLANs and address acquisition methods for each WAN; |
|
WAN Isolation Characteristics
|
Support data isolation between different WAN connections Support the isolation of ARP messages on the network and user sides |
|
|
Two characteristics
|
VLAN
|
Support receiving untagged, priority tagged, and tagged messages Support adding p-bit and/or VID to uplink untagged messages, adding VID to priority tagged messages, and supporting discarding tagged messages Support removing tags from tagged messages received downstream; Support for switching between network side and user side VLANs |
|
Message Forwarding
|
Support port binding method for data forwarding Support VLAN binding method for data forwarding Support routing and forwarding methods for data forwarding |
|
|
WLAN
|
WLAN Interface
|
AX3000 WiFi6 interface, compliant with 802.11ax protocol requirements; Support WLAN function enable/disable |
|
Working Frequency Band
|
The 2.4GHz frequency band supports adaptive bandwidth modes of 20MHz, 40MHz, and 20/40M, with a default bandwidth of 20MHz The 5GHz frequency band supports bandwidth modes of 20MHz, 40MHz, 80MMHz, and 160MHz Both the 2.4G and 5G frequency bands support uplink and downlink OFDMA functions, and support RU based concurrent scheduling of STA; Both 2.4G and 5G uplink and downlink should support 1024-QAM modulation mode |
|
|
Working Mode
|
2.4GHz supports 802.11b/g/n/ax mixed operating mode; 5GHz supports 802.11a/n/ac/ax mixed operating mode; |
|
|
· Orifice Function · |
Support adjustable WLAN transmission power Support automatic rate adjustment Support Target Wake Time (TWT) Support the configuration of Beacon beacon frame transmission interval and DTIM interval Support DCM and Extended Range functions Support multi antenna beamforming technology |
|
|
Multiple SSID Features
|
Support multiple SSID functions, support default 2.4G and 5G dual frequency integration Support configuring different VLANs for different SSIDs Support the independent setting of BSSID, send queue, security mechanism, configuration parameters, and binding relationships between WAN connections for each SSID Supports starting and stopping any SSID without affecting other SSIDs |
|
|
Sharing and Roaming
|
Support WLAN sharing and provide users with WLAN coverage The main gateway and sub gateway devices support 802.11k, 802.11v, and 802.11r protocols, enabling STA roaming between devices |
|
|
QoS
|
Support priority based data processing and forwarding Support WLAN air port fairness Support the Long OFDM symbol sending mechanism Support the Spatial Reuse/Bss Color function Support differentiation based on Bss Color |
|
|
Load Balance
|
Collaborate between the main gateway and sub gateways to achieve load balancing Support load balancing based on the number of connected users Support traffic based load balancing Support 2.4G/5G intelligent load balancing |
|
|
Address Management
|
IPv4/v6 Dual Protocol Stack
|
Support IPv4/v6 dual protocol stack Support the creation of IPv4 and IPv6 network connections |
|
DS Lite Function
|
Support DS Lite function Support independent opening and closing based on WAN connection |
|
|
IPv4
|
WAN supports independent acquisition of IP addresses The WAN side supports three methods: static configuration of IP addresses, dynamic acquisition of IP addresses through DHCP and PPPoE The LAN side supports DHCPv46 server function |
|
|
IPv6
|
WAN side supports independent acquisition of IPv6 address prefixes WAN side supports obtaining IPv6 address prefixes from servers through DHCP-PD WAN side supports obtaining IPv6 address prefixes from servers through PPPoE The LAN side supports DHCPv6 server functionality |
|
|
NAT Function
|
Support NAT/NAPT function Support ALG function Supports Virtual Server (Port Forwarding) functionality |
|
|
DNS Function
|
Support DNS relay Support DNS clients for IPv4 and IPv6 Support the use of corresponding DNS servers for each WAN connection |
|
|
QoS
|
Business Flow Tags
|
Support stream classification based on IP address, L4 port number, physical interface, and SSID Support stream classification based on MAC and 802.1p Support stream classification based on DSCP Support stream classification based on protocol type Support the use of DSCP or 802.1p priority labels based on the above classification results |
|
Business Flow Speed Limit
|
Support bandwidth guarantee and restriction mechanisms based on data streams Supports speed limiting of upstream and downstream data streams based on user side physical ports, VLANs, and IP addresses |
|
|
Queue Scheduling
|
Supports 8 priority queues Support mapping data streams to different hardware queues Support SP, WRR, SP+WRR queue scheduling methods |
|
|
Session Limit
|
Support for limiting the total number of sessions
|
|
|
VoIP
|
VoIP Function
|
The main gateway supports a built-in voice gateway and implements IP telephone services using the SIP protocol The main gateway supports basic calls, abnormal calls, and supplementary services. Support supplementary service functions such as caller number display, call waiting, three-way call, hotline, etc. The main gateway supports T.30 transparent fax and T.38 encoding fax, and supports fax signal tone detection. The main gateway supports MODEM service, MODEM signal tone detection and transparent mode MODEM service. |
|
VPN
|
IPSec Function
|
Support the provision of secure encryption channels based on IPSec Support transmission mode AH, tunnel mode AH, transmission mode ESP, and tunnel mode ESP working modes Support VPN networking forms such as Site to Site and Remote Access; Support pre shared keys and X.509 digital certificates for VPN authentication Support encryption algorithms such as DES, 3DES, AES 128, AES 192, AES 256 that comply with relevant national password management regulations Support the establishment of IPSec tunnels based on fixed IP addresses and domain names Support transparent traversal of IPSec packets through NAT gateways; Support for DPD protocol Support priority processing for different VPN tunnels and non VPN traffic Support internet traffic forwarding |
|
VxLAN Function
|
Support the VxLAN packet encapsulation format specified in the RFC7348 protocol Support enabling or disabling specified VNI Support VxLAN MAC table item management function Support the sharding processing of large packages |
|
|
L2TP Function
|
Support LAC and LNS Support L2TPv2 function Support transparent traversal of L2TP packets through NAT gateways |
|
|
Safety Characteristic
|
firewall
|
Support the setting of firewall levels and firewall rules Support filtering and processing of messages based on their characteristics |
|
Anti Attack
|
Support anti DoS attack function Support the provision of anti port scanning function Support the function of opening and closing service ports Support limiting the number of source MAC addresses learned by each user's LAN port Support static binding of IP address and MAC address Support suppression processing of broadcast/multicast packets for specific protocols |
|
|
Network Access Security
|
Support DMZ function Support access control based on MAC address and IP address Support setting black and white lists to achieve URL access control function |
|
|
WLAN Security
|
Support SSID broadcast on/off function Support authentication methods such as Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed mode Support WEP (64bit), WEP (128bit), AES, TKIP, AES/TKIP mixed mode and other encryption modes Supports China's national wireless local area network security standards and complies with the provisions of GB15629.11-2003 |
|
|
Voice Security
|
Support the setting and enabling of OPTION60 to carry encrypted voice account authentication information function
|
|
|
Account Password
|
Debugging account disabled The account password should meet the requirement of at least 8 digits in length, including characters, numbers, and special characters |
|
|
Device Port Security
|
The device defaults to disabling remote management protocols such as SSH and telnet
|
|
|
Channel Security Management
|
Prohibit logging in with empty or weak passwords Do not support the existence of backdoors in any form such as hidden backdoors or secret channels |
|
|
Authentication
|
Support local Portal authentication based on Web Portal Support the sending of online and offline information from user terminals to relevant servers Support authentication for access users on different SSIDs or other interfaces Support authentication free whitelist |
|
|
Networking Security
|
Support the backbone fiber protection switching function Support long emitting ONU detection capability |
|
|
OAM
|
OAM Function
|
Support the Dying Gasp power down alarm function Support simulation testing function with built-in business ports |
|
NTP
|
NTP Function
|
Supports SNTP Client functionality Support configuration of NTP server addresses Support synchronization with NTP servers when the device is powered on |
|
Device Synchronization
|
Synchronized Primary and Sub-gateways
|
WiFi Synchronization: WiFi configuration synchronization, WiFi roaming switch automatic tuning Account synchronization: WEB account synchronization automatically synchronizes the user account and password of the main gateway Time synchronization: Master slave device time synchronization, including information such as time and time zone |
