Kexint Automatic Fiber Optic Patch Cord Polishing Machine Grinding Machine

• Type: Optic Fiber Grinding Machine
• Machine Type: Fiber Optic Polishing Machine
• Relative Humidity: 15%~85%
• Use: FTTX
• Fiber Optic Polishing Machine: CE
• Work Temperature: 10 ~ 40 Celsius Degrees
• Model NO.: KXT-ST560
• Pressure Way: 4 Coil Spring
• Rotation Speed: 0 ~ 220 Rpm
• Height of Plate Jumpiness: <10 Um
• Electric Power: 40 W
• Network: None
• Polishing Plate Size: 127mm
• Warranty Time: 2 Years
• Polishing Cycle: 2.5mins
• Transport Package: Inner Carton+Outer Carton
• Trademark: KEXINT
• Origin: Guangdong, China
• Production Capacity: 1000 Piece/Pieces Per Week

Product Description

Products Description

The Fiber Optical Polishing Machine on The Base of International Universal Standards and Long-Term Hands-On Experience, It Exceeds Requirements for Gr-326 End Face Geometry, And This Fiber Optical Polishing Machine Adapt To Four Corners Compression And New I. P. C. Holder Technology Yields The Best Results In The Industry. No Variability in Result When Polishing 1 Or 24 Connectors, Jig Will Be Installed Stable, And Compact Size.

 

Feature

1If supporting the use of our grinding fixture then its no need to make any adjustment.Besides the crafts influences,Interference passing rate can reach 100%,Offset mainly within 30UM.

 

2It can store 15 kinds of product parameters.Each product can store 5 grinding process, and can be free to adjust the grinding process time, speed, slow start, grinding compensation, button select the operating procedures, simple operation.

End face 3D indicators will over GR-326 requirements.

3Each process can adjusted grinding speed (10 ~ 160 rpm) to ensure maximum process flexibility and the best product quality meanwhile improving the use of grinding efficiency.

4Grinding programme is with PLC Module and touching Screen which shows the current speed, time, the number of grinding tablets, which will good for control the quality of the process, And it's no need for hiring skilled workers with our machine.

5Independent pressurized Jigs ensure highest 3D passing rate , it is no difference even for 50pcs Fibre Optics.it can create efficient grinding with various types of connectors. Such as more than 50pcs LC connectors and 36pcs SC connectors at once in a short time.

6Equipped with our special grinding fixture, you also can grind other types of ceramic pins or bare fibers,and some glass, plastic connectors or miniature devices.

7The main devices is from famous brands with new transmission structure so that its mechanical jitter is less than (≤ 0.01mm). Both life time and accuracy are3-5 times than the use by ordinary models.

 

8This model is fit with most fixtures on the market. Adjustable speed grinding machine and process a variety of fiber optic connectors,for example:LC/UPCLC/APCFC/UPCFC/APCSC/UPCSC/APCST/UPCMT/PCMT/APCE2000 and so on.With Strongly loading capacity for allowing grinding of more than 48 SC fiber optic connectors (standard 18 to 50 connectors) It can be achieved in the strict control of the grinding costs and maintain high quality and consistency.Easily operation and maintenance required no special skill workers.

 

Points for attention

 

1Ground the machine to prevent electric shock before you turn on the power. Never touch the machine when your hands are wet.

 

2Never touch rotating parts while the machine is running.Make sure the machine has come to a full stop before changing the polishing holder. Always turn off the power and unplug the machine when leaving the machine.

3To prevent rusting, immediately wipe the unit dry environment. after you turn off the power. Never use or store the unit in very humid

 

4Do not disassemble or make any modifications to the machine.Do not place foreign substances or objects inside the machine.

 

5Install the machine on a workbench with sufficient strength to support it. Keep the machine level and stableness in order to keep it from tipping over or falling off the workbench.

 

6Check the lubrication condition of each transmission part regularly and add the grease in time.

 

7Observe the grease under the grinding chassis, and replace and replenish the new grease regularly. (15 ~ 20 days when normal working time of the grinding machine should be replaced by grinding chassis lubricant.)

 

8Maintain a clear space of at least 30cm from the cooling fan outlet.

 

9If the grinding machine and fixture are not used for a long time, the grinding machine should be cleaned and the clamping device is soaked in chloroethane with ultrasonic cleaning. Then blow dry in a dry toolbox.

 

10Grinding workshop temperature should be controlled between 20 ° ~ 25 °, flat gasket within 1.5.

 

11If an abnormal phenomenon occurs, it should be handled by a professional technician or contact the manufacturer. The manufacturer will send professional staff to repair, so as not to affect the production.

 

specification
 

Machine Type	KXT-ST560
Machine Size	L 240(mm) × W 240(mm) × H 260(mm)
Net Weight	28kg
Power Input	110~230VAC 50Hz/60Hz
Electric Power	126w
Relative Humidity	15%~85%
Work Temperature	8~45
O.D. of Rotation Plate	127 mm5 inch
Time Settings	99 min 99 sec (Max)
Speed for Rotation Plate	140 rpm
Height of Plate Jumpiness	< 10 um
Pressure Configuration	21 ~ 36 N/cm2
Noice unloading Less	50 dB Libration
Working Status	0.25g 5~100Hz 10min
Stopping Status	0.50g 5~100Hz 10min

 

 

Our advantages:

1.Good reply: Your inquiry related to our products or price will be replied within 24 hours.

2.OEM&ODM: We can help you to design or put your logo and company name into products.

3.Remote Technical support&Full Technical Document

4.Warranty: 1 year warranty( While the warranty is not responsible for those broken by violence or updated with other brands.)

5.English software, English Indicator

6.Professional, Very competitive price

7.Large Stock, Fast Delivery

8.Quality Assurance

Company Profile

 

 

FAQ

Q1: Are you trading company or manufacturer ?A1: We are factory.

Q2: How long is your delivery time?
A2: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity

Q3: Do you provide samples ? is it free or extra ?
A3: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q4: What is your terms of payment ?
A4: Payment<=1000 USD, 100% in advance. Payment>=1000 USD, 30% T/T in advance balance before shipment.

Q5: Can I visit you?
A5: Sure. our factory is in Shenzhen ,China.Please contact us to make an appointment.

Q6: Can I negotiate the prices?
A6: Yes,we may consider discounts for multiple container load of mixed goods

Q7: How much will the shipping charges be?
A7: lt depends on the size of your shipment and the method of shipping. We will offer the charge

Q8: Can you produce according to the samples?
A8: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q9What is your terms of packing?
A9: Generally, we pack our goods in neutral white boxes and brown cartons. lf you have legallyregistered patent we can pack the goods in your branded boxes after getting your authorization letters.

Q10 What is your terms of delivery?
A10: EXW.FOB.CFR.CIF.DDU.DDP

Q11How about the Warranty?
A11: There are 12 months for the warranty. While the warranty is not responsible for those broken by violence or updated with other brands