Kexint Opgw 12 24 48cores FTTH Stranded Loose Tube Cable Electrical Fiber Optic Cable

• Customization: Available
• Application: Communication
• Type: Fiber Optic Cable
• Model NO.: OPGW
• Allowed Lateral Pressure: 100(N/100mm)<1000(N/100mm)
• Allowed Tensile Strength: 100N<1000N
• Core: Multicore
• Certification: RoHS, CE, ISO9001, VDE, CCC
• Brand: OEM
• Sheath Material: PVC
• Tensile Strength: 75kn
• Bending Radius: 285 mm
• Jacket: Metal Wires
• Cable Diameter: 10.8mm
• Transport Package: Wooden Drum
• Trademark: KEXINT
• Origin: Guangdong, China
• HS Code: 8544700000
• Production Capacity: 5000 Kilometers/Week

Product Description

Product Description

OPGW ADSS Fiber Optic Cable 24B1.3 Range 60 130 Power Telecommunication Outer material Metal wires Optical Fiber Composite Overhead Ground Wire (also known as fiber composite overhead ground wire).

The optical fiber is placed in the ground wire of the overhead high-voltage transmission line to form a fiber-optic communication network on the transmission line.This structure has the dual functions of ground and communication, and is generally called OPGW cable.

The OPGW cable is wrapped with metal wires. The optical cable is more reliable, stable and firm. Due to the integration of the overhead ground wire and the optical cable, compared with the use of other optical cables, the construction period is shortened and the construction cost is saved.

In addition, if the OPGW is made of aluminum-clad steel wire or aluminum alloy wire, it is equivalent to erecting a good conductor overhead ground wire, which can reduce the potential supply current of the transmission line, reduce the power frequency overvoltage, and improve the power line communication line.

The benefits of interference and dangerous effects. Because the fiber has anti-electromagnetic interference and light weight, it can be installed on the top of the transmission line tower without considering the optimal mounting position and electromagnetic corrosion. Therefore, the OPGW has remarkable characteristics such as high reliability, superior mechanical performance, and low cost. This technique is particularly suitable and economical when laying or replacing existing ground lines.

 

Features
Up to 144 fibers					High tensile strength
Provide lightning resistance					Less additional load to tower
Good bullet resist performance					Provide high crush resistant and tensile performance
Fibers are protected by stainless steel tubes					Stranded design provides wide range combination of electrical conductivity and mechanical tensile strength

OPGW construction erection should pay attention to the problem:

The construction of OPGW is different from ordinary steel strands. Care should be taken to prevent permanent damage to avoid the impact of fiber performance in the future. It should be considered: OPGW torsion, microbending, local radial pressure outside the clamp and contamination of the fiber. . Therefore, the following effective measures should be taken during the construction phase to solve:

(1) Prevent OPGW from twisting

Install a counterweight and anti-torsion device on the running plate and the tightening clamp;
Use special double groove pulleys;
Tension anti-wire machine with double winch;
(2) Prevent and reduce the microbend and stress of OPGW
No acute angles are allowed (control the minimum bending radius of 500mm);
The diameter of the OPGW cable disc should be no less than 1500mm;
The diameter of the pulley should be more than 25 times the diameter of the OPGW, generally not less than 500mm; the inside of the pulley should have a nylon or rubber gasket to prevent scratching the surface of the OPGW;
Suitable traction line and payout fittings;
Specify the maximum disk length of the OPGW to be 6000M to prevent the number of pulleys from passing;
The line angle of the continuous discharge line is limited to ≤30°. In the tensile section of a discharge line, the OPGW after the corner should be in a "C" shape;
(3) Control of the take-up tension:
Hydraulic tensioning machine with traction device and traction machine;
Limit the speed of the line to be ≤ 0.5 m / s;
(4) Prevent fiber contamination
At the OPGW construction and erection, attention should be paid to the end of the package;
In addition, before the OPGW arrives at the site, before the erection, after the erection is completed for the fiber connection and the construction of the whole line is completed, the optical fiber attenuation acceptance test of the OPGW should be carried out in time.

Specification

item	value
Model Number	OPGW
Type	Fiber Optic Cable
Place of Origin	China
	Guangdong
Brand Name	KEXINT
Number of Conductors	≥ 10
Jacket	metal wires
cable diameter	10.8mm
Tensile Strength	75KN
Installation	-60~+80
bending radius	285 mm

Packing & Delivery

wooden drum

Company Profile