| Customization: | Available |
|---|---|
| Product Name: | Fiber Optic Cabinet |
| Use: | FTTX |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Specifications And Dimensions
Cross-connection welding tray
Product Description
GXF-1152 (Fiber Distribution Hub) suggested here include different capacity (1152,576,288, 144,48 Core), which is applied in the FTTX/ODN network to connect the feeder cable and distribution cable. The devices can be used to fixed and protect cable, terminate and splice fiber, distribute and dispatch fiber route, protect other space part and install value-add module.
Product details
|
Product Name |
Fiber Distribution Hub |
|
Material |
1.5 mm Thickness Steel Plate |
|
Size/Capacity |
1336*1553*550mm(H*W*D)/1152Fibers |
|
Color |
Grey |
|
Splicing termination tray |
12 cores for each tray |
|
Splicing Slot |
96 Pcs |
|
Splitter type |
split ratio from 1x2 to1x32 and 2x4 to 2x32 type splitter |
|
Installation |
Ground |
Features
l Separate module: easy for implementation and maintenance from both front and rear side.
l Neat fiber management and good protection.
l Splitter is placed separately and put large quantity of splitter without affecting the distribution area's capacity.
l Outdoor Street Cabinet,max up to 96Trays,12Fibers one tray, total 1152 Fibers,SC adapter can be installed.
l Free combination for different split ratio.
l Water-proof design with IP-65 Protection level.
Cable route
Splicing termination tray (Reference picture)
Working Environment
l Working temperature: - 25 °C ~ + 60°C
l Storage temperature: - 40 °C ~ + 70 °C
l Relative humidity: when 30 °C less than 85%
l The atmospheric pressure: 70 ~ 106Kpa
Installation
1. Stripping, fixing and protecting the optical cable
Introduce the optical cable into the box from the lower optical cable entry hole and tighten the optical cable fixing sleeve at the entrance.
(1) Clean the optical cable;
(2) Strip the optical cable, the length is about 1.5 meters + the distance from the stripping point to the farthest connection module (abbreviated as: 1.5m+L) (for reference only), 25mm is reserved for the armor layer and 100mm is reserved for the center reinforcement core;
(3) Insert the optical cable reinforcement core into the reinforcement core fixing piece and tighten the screws;
(4) Clean the bare fiber and put on the bare fiber protection sleeve
(5) Gently insert the protective sleeve with bare fiber into the cable clamp slot of the optical cable stripping protection device in order.
Accessories
|
No. |
Name |
Quantity |
Remarks |
|
1 |
Instructions |
2 |
|
|
2 |
Record Sheet |
4 |
|
|
3 |
Expansion Bolts |
4 |
|
|
4 |
Fiber Protective Tube |
2M |
|
|
5 |
Nylon Tie / Plastic Cable Tie |
100pcs*2 |
2.5mm*100mm |
|
6 |
Nylon Tie / Plastic Cable Tie |
100pcs |
2.5mm*150mm |
|
7 |
Heat Shrinkable Protection Sleeve (Single) |
1152 |
1.2*60mm |
|
8 |
Hose Clamp(Stainless Steel) |
96 |
|
|
9 |
Insulation Tape |
4 |
|
|
10 |
Sealing putty |
2 |
Package:
1. Carton packaging size: 1553×1460×600mm
2. Environmentally friendly insect-proof wooden board size: 1460×600mm
){kind=link}