| Customization: | Available |
|---|---|
| Warranty: | 1year |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Distance: | 120KM | Wavelength: | 1310nm/1550nm |
|---|---|---|---|
| Connector: | SC/FC/ST | Transmission Speed: | 1000Mbps |
| Fiber Type: | SM | Optic Wavelength: | 850nm, 1310nm, 1550nm, Tx1310/Rx1550nm, Tx1550/Rx1310 |
| Application: | FTTX | Power Output: | AC220V/0.5A,DC-48 V /0.5A, DC5V/1A,2A |
| Certification: | CE FCC RoHS ISO | ||
| High Light: |
electrical sfp module,fiber optic ethernet transceiver |
||
1. Supports 10/100/1000Base-T, 1000Base-X protocol.
2. Flow control for full duplex and half duplex.
3. Supports up to 10k byte JUMBO frame.
4. Supports Fiber Port Trunking, Increasing Fiber Channel Bandwidth and Supply Fiber Channel Redundancy.
5. Supports Ports Based VLANS and TAG Based VLANS.
6. In conformity to safety code of FCC and CE MARK.
7. Connector: Multi-UTP RJ-45connector, one or two fiber connector
8. Operation mode: full duplex mode or half duplex mode
9. Power supply parameter: DC 5V 1A/2A
10. Environmental temperature: 0-50ºC
11. Relative humidity: 5%-90%
12. UTP cable: Cat5 UTP cable
13. Transfer fiber: multimode(50/125, 62.5/125 or 100/140um); single mod( 8.3/125,8.7/125, 9/125 or 10/125um).
Cable Connection of 10/100/1000M Series Gigabit Converter
| Port type | Cable Type | Max.Length |
| 10/100/1000BASE-T | Cat. 5, 5E UTP, RJ-45 | 100 meters |
| 1000BASE-SX | Multi-mode Fiber of 850n (62.5/125µm) | 220 meters |
| 1000BASE-SX | Multi-mode Fiber of 850nm (50/125µm) | 550meter |
| 1000BASE-LX | Single-mode Fiber of 1310nm(9/125um) | 10-100km |
LED Indication
Please refer to the following table for LED indication of 10/100/1000M Series Gigabit Converter
| LED | Status | Indication |
| power | ON | The Power is on |
| lnk/act | Flash | F1:FX Data,P1 and P2:TP Data |
| speed | ON | The Speed is 1000M |
Specifications of 10/100/1000M Series Gigabit Converter
| MODEL | 1,10/100/1000M Series | 2,10/100/1000M Series | |
| STANDARD |
IEEE802.3ab 1000BASE-T; |
IEEE802.3ab 1000BASE-T; |
|
|
IEEE802.3z 1000BASE-SX |
IEEE802.3z 1000BASE-LX |
||
| INTERFACE |
RJ-45 part x 1 (10/100/1000 Mbps) SC connector Fiber port x 1 (1000 Mbps) |
||
|
TP CONNECTIONS |
10/100/1000BASE-T:UTP Category 5, 5E | ||
|
FIBER CONNECTIONS |
1000BASE-SX:62.5/125µm or 50/125µm Multi-mode fiber, SC/FC connector |
1000BASE-LX:9 or 10/125µm Single-mode fiber ,SC/FC connector |
|
|
LED INDICATIONS |
lnk/act,speed,power | ||
| MAX.DISTANCE | 550m/220m | 10km and 20km,100km | |
| ENVIRONMENT |
Operating Temp:0~+70ºC Storage Temp:-40~+85ºC Humlblty:10~90% non-condensing |
||
| POWER | 5V 2A | ||
| NET WELGHT | 500 g | ||
| EMISSION | FCC Class A, CE | ||
Typical Optical Power Budget
| 10/100/1000M Series | |||||
| Connector | SC | SC | SC | SC | SC |
| Wavelength | 850nm | 1310nm | 1310nm | 1310nm | 1550nm |
| Typical | 550m/220m | 10Km | 20Km | 30Km | 50-100Km |
| Min TX | -11dBm | -11.0dBm | -10.0dBm | -7.0dBm | -1~-6.0dBm |
|
Max TX PWR |
-3.0dBm | - 3.0dBm | -1.0dBm | 0.0dBm | 0.0dBm |
| Sensitivity | -18dBm | -21.0dBm | -21.0dBm | -24.0dBm | -24.0dBm |
|
Link Budget |
8.5dB | 12.0dB | 15.0dB | 19.0dB | 19.0dB |
Installation
a. Turn off the power of the device/station in the network in which the media converter will be installed.
b. Ensure that there is no activity in the network.
c. Attach fiber cable from the media converter to the fiber network. The fiber connections must be Matched-Transmit socket to receive socket
d. Attach a UTP cable from the 1000Base-Tx network to the RJ-45 port on the product
e. Connect the power cord to the media converter and check if the power LED lights up. The TP Link and FX link LED will light when all the cable connections are satisfactory.
f. Turn on the power of the device/station.
){kind=link}