Customization: | Available |
---|---|
Application: | Local Communication Cable |
Conductor Material: | Plastic |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
MTP conversion cable is designed to provide a more flexible multi-fiber cabling system based on MTP products. Unlike MTP harness cable, MTP conversion cables are terminated with MTP connectors on both ends and can provide more possibilities for the existing 24-fiber cabling system.
The 40/100G MTP conversion cables eliminate the wasted fibers in current 40G transmission and upcoming 100G transmission. Compared to purchase and install separate conversion cassettes, using MTP conversion cables is a more cost-effective and lower-loss option.
Product Highlights
MTP cables are offering state-of-the-art multi-fiber and mechanical performance.
MTP Connector
Deliver stable signals and achieves flexible system design.
Corning SMF-28 Ultra Fiber
Allow tighter cable bends for slack storage and routing.
Plenum (OFNP) Outer Jacket
Fire resistance and low smoke to minimize damage.
Fiber Connector | MTP | Gender | Female |
Fiber Mode | OS2 9/125μm | Wavelength | 1310/1550nm |
Glass Fiber | Corning SMF-28 | Polish Type | APC to APC |
Insertion Loss | 0.35dB Max (0.15dB Typ.) | Return Los | ≥60dB |
Attenuation at 1310nm | ≤0.32dB/km | Attenuation at 1550nm | ≤0.18dB/km |
Cable Jacket | Plenum (OFNP) |
Minimum Bend Radius
|
10mm |
Jacket OD | 3.0mm | Breakout Length | 0.5m |
Installation Tensile Load | 66N | Tensile Strength (Long/Short Term) | 80/240N |
Operating Temperature | -10 to 60°C (14 to 140ºF) |
Storage Temperature
|
-40 to +85°C (-40 to 185ºF) |
Q:Can 9/125 and 8.3/125 jumpers be used together? Is there a big difference between them?
A:8.3 and 9 refer to the fiber diameter of the fiber jumper, and 125 is the diameter of the jumper. The single-mode optical fiber provided by FS is 9/125, which is in line with international standards, and 8.3/125 is non-standard. If the two are used together, theoretically there will be light leakage and the loss will be relatively large, so it is not recommended to use them together.