Kexint FTTH Fiber Cable Tools Power 750W 220V 50Hz Optical Fiber Vertical Curing Oven

• Customization: Available
• Fiber Count: 90-100
• Use: FTTH
• Model NO.: KXT-515
• Size: 425mmx325mmx145mm
• Weight: 8 Kg
• Power Supply: 220VAC
• Certification: CE/RoHS/ISO9001
• Type: Optical Fiber Curing Oven
• Network: None
• No. of Fiber: 100
• Warranty Time: 1 Year
• Power: 800W
• Application: Fiber Optic Patch Cord Production
• Operating Temperature: 20 - 300 ℃
• Adjustable Range of Heating Time: 1 Minute-99.99 Hours
• Transport Package: Inner Carton+Outer Carton
• Trademark: KEXINT
• Origin: Guangdong, China
• Production Capacity: 100 Piece/Pieces Per Week

Product Description

Products Description

Optical fiber connector heating and curing furnace is suitable for optical fiber connector manufacturers, used for heating and curing various optical fiber connectors. 100 ceramic ferrules or 50 integrated connectors can be cured simultaneously at one time; stable temperature control The thermostat has a self-tuning (PID) function, which can set the reference temperature freely, and the temperature control accuracy can reach 1 ; the heating time can be adjusted.

This equipment employs two sets of independent precise heating control systems to respectively control two heating boards which are able to simultaneously cure 24 ferrules (standard dimension is φ 2.5mm). This equipment features high production efficiency, stable and reliable quality. (Note: employs one set of precise heating control system and one heating board.) Different types of products can be cured using different heating tools.

Name and function of each part:

1. Heating tool

It is a dismountable fixture, which is used to install the ferrule to be cured, and is inserted into heating board to heat ferrule

to be cured.

2. Heating board

It is securely mounted on panel, and internal heating device is used to generate heating and cure ferrule.

3Fuse

Type of fuse is 2A/220V

4Temperature controller

It is used to control heating temperature of heating board, and temperature can be adjusted within 60~150 (it is prohibited to make temperature over 150, otherwise the equipment will be damaged).

5Power switch

It is used to turn on or off the power.

6Timing switch

Press this switch to start up time relay, and press twice continuously this switch to stop timer.

7Time relay

Adjusting parameters of time relay can shorten or prolong heating and curing time (now relay is working).

8 Heating-on indicator

When this indicator is on, the equipment is in heating status.

9Heating-off indicator

When this indicator is on, the equipment stops heating

Operation:

1.1 Check before startup

1Check whether component of equipment is complete

2Check whether screws and buttons on panel are loose or missing

3Check whether power line is properly connected

1.2 Setting of heating temperature and time

1.2.1 Setting of heating time

1. Remove the enclosure of temperature controller and time relay on panel

2. Adjust digital parameters to set required temperature and time.

3. Install the enclosure.

1.2.2 Setting of heating temperature

1. Press MODE button, the red number on panel representing temperature changes into as shown in left, and now change the green number under red number to set temperature.

Technical Parameters

net weight			8 KG
Dimensions			425x325x150mm
Heating temperature (Celsius)			20 300
control precision (Celsius)			1
One-time processing capacity			100 ceramic ferrules or 50 fiber optic connectors
Suitable for fiber optic connector models			SC/FC/ST/LC/E2000/MU The optical fiber connector1.25MM/2.5MM Ceramic ferrule)
Operating Voltage			AC220V
working frequency			50-60Hz
heating time			1 minute-99.99 hours
application			800w
MOQ			1 piece

Company Profile