| Customization: | Available |
|---|---|
| Warranty: | 1year |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Fiber Type: | G652D/G657A1/G657A2 | Fiber Count: | 2-24 Cores |
|---|---|---|---|
| Loose Tube Material: | PBT | Strength Member: | Aramid Yarn |
| Outer Sheath Material: | HDPE | Diameter: | 1.8-2.8mm |
| Cable Weight: | 2.6-7KG/KM | MAX. Tensile Strength: | 60N |
| Operating Temperature: | -40ºC~85ºC | ||
| High Light: |
GCYFXTY air blown fiber optic cable,60N air blown fiber optic cable,PBT Tube air blown fiber cable |
||
|
|
G.652
|
G.655
|
50/125μm
|
62.5/125μm
|
|
|
Attenuation(+20ºC)
|
@850nm
|
|
|
≤3.0dB/km
|
≤3.0dB/km
|
|
@1300nm
|
|
|
≤1.0dB/km
|
≤1.0dB/km
|
|
|
@1310nm
|
≤0.36dB/km
|
≤0.36dB/km
|
|
|
|
|
@1550nm
|
≤0.22dB/km
|
≤0.23dB/km
|
|
|
|
|
|
@850
|
|
|
≥500MHZ·km
|
≥200MHZ·km
|
|
@1300
|
|
|
≥1000MHZ·km
|
≥600MHZ·km
|
|
|
Numerical aperture
|
|
|
|
0.200±0.015NA
|
0.275±0.015NA
|
|
Optical cable cut-off wavelength
|
|
≤1260nm
|
≤1480nm
|
|
|
|
Micro cable model
|
GCYFXY-xxF(MTE +outer diameter)
|
||||
|
MTE1.8
|
MTE2.0
|
MTE2.3
|
MTE2.5
|
MTE2.8
|
|
|
Fiber count
|
2~4
|
2~4
|
6~12
|
2~12
|
14~24
|
|
HDPE Outer Sheath Thickness
|
Nominal:0.20mm,Least 0.15mm
|
||||
|
Nominal outer diameter
|
1.8mm
|
2.0mm
|
2.3mm
|
2.5mm
|
2.8mm
|
|
Approximate weight
|
2.6 kg/km
|
4.0 kg/km
|
5.0 kg/km
|
6.0 kg/km
|
7.0kg/km
|
|
Cable Attenuation (Single Mode Fiber)
|
1310nm/1550nm≤0.35/0.22dB/km
|
||||
|
Maximum pull
|
40N
|
40N
|
50N
|
60N
|
60N
|
|
Maximum crushing force
|
600N/100mm
|
||||
|
Allowable minimum bending radius
|
10 times/20 times the outer diameter of the optical cable
|
||||
|
Applicable temperature range
|
Storage -30~+60ºC; Installation -10~+40ºC; Operation -20~+50ºC
|
||||
|
Cable life (estimated)
|
25 years
|
||||
|
Test Equipment
|
Pipeline models suitable for air delivery and corresponding typical air delivery lengths
|
||
|
Polyment: PRM-196 , PR140 etc. Air pressure: 13bar
|
Fiber count
|
Microtubule model 3.5/5.0mm |
Microtubule model 5.5/7.0mm |
|
2~12 cores
|
800m
|
1500m
|
|
|
14~24 cores
|
500m
|
1500m
|
|
|
Item
|
Test reference standard
|
Test Results
|
Remark
|
||
|
Stretch
|
IEC 60794-1-2-E1 (GB/T 7424.2-E1) |
Fiber strain(%)
|
Attachment attenuation(dB)
|
The short-term test pull is the maximum pull, The long-term test pull is 1/3 of the maximum pull
|
|
|
|
Short term ≤0.3 Long-term ≤0.1
|
Short term: ≤0.1, No obvious strain after stress removal; Long term: none apparent
|
|||
|
|
IEC 60794-1-2-E3 (GB/T 7424.2-E3) |
Short-term crushing force: additional attenuation ≤0.05; Long-term crushing force: no obvious; After the stress is removed, the optical fiber has no obvious residual additional attenuation, No visible cracks on sheath surface |
Short-term test pressure: 600N
Long-term test pressure: 200N
|
||
|
|
IEC 60794-1-2-E6 (GB/T 7424.2-E6) |
After the test: the optical fiber has no obvious residual attachment attenuation; No visible cracks in sheath
|
Bending radius = 20 times the microcable diameter
|
||
|
load=15N
|
|||||
|
Number of bends:25
|
|||||
|
|
IEC 60794-1-2-E7 (GB/T 7424.2-E7) |
After the test: the fiber does not break and the sheath has no visible cracks, After stress relief, there is no obvious residual additional attenuation |
Twist angle:±180º
|
||
|
load=15N
|
|||||
|
Number of twists:5
|
|||||
|
|
IEC 60794-1-2-E11A (GB/T 7424.2-E11A) |
|
Mandrel diameter = 20 times microcable diameter
|
||
|
Number of close turns=10
|
|||||
|
Cycles=5
|
|||||
|
All the above results are tested at 1550nm wavelength
|
|||||
|
Item
|
Testing Method
|
The indicators that the test should achieve
|
|
|
IEC 60794-1-2-F1
|
Fiber additional attenuation(1550nm)
|
|
≤0.1 dB/km
|
||
|
Water Permeability
|
IEC 60794-1-2-F5B
|
1m water height, 3m cable, test time 24 hours No water leakage from the other end of the micro-cable
|
|
Trickle Performance
|
IEC 60794-1-2-E14
|
The microcable is maintained at an ambient temperature of 70°C for 24 hours Microcable No Fill Compound Drip Out
|
Are you a trading company or manufacturer?
We are professional supplier. We are not only a trading company but also a manufacturer. Our factory name is Comelink co.,LTD
What are your main products?
Our products cover mainstream brands of OLT and PON cards, ONT ONUs, enterprise switches, optical modules and OEM ODN equipment.
Do ONT ONU products provide customized services?
Yes, we can customize your logo, company information, pre-configuration, packaging box, etc.
What is your delivery time?
Usually we can ship within 1-3 days for small quantity, and about 15-20 days for large quantity.
What are your payment terms?
Alipay, T/T, Western Union and Paypal. This is negotiable.
What is the shipping method?
Shipping by sea, air or express (EMS, UPS, DHL, TNT, FEDEX, etc.).
For OLT, how to ensure quality?
We conduct strict testing before shipment to ensure the goods are available, and electronic reports will also be shared with you. In addition, we also provide one-year warranty and technical service.
How do you make our business a long-term and great relationship?
We maintain good quality and competitive prices to ensure our customers benefit;
We respect every customer as our friend, and we sincerely do business and make friends with them, no matter where they come from.
Is there a minimum order quantity?
No, a test sample is also available.
){kind=link}