| Customization: | Available |
|---|---|
| Warranty: | 1year |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Outer Jacket: | PE Or HDPE | Fiber Count: | 12/24/48/72/96/144 |
|---|---|---|---|
| Fiber Type: | G652D/G657A1/G657A2 | Fiber Brand: | Corning/YOFC/FIBERHOME |
| Messenger: | 8.0*1.0mm Or 7.0*1.0mm | Length Per Roll: | 2km To 4km |
| Instructions: | Outdoor Aerial Self-supporting | Colour: | Black |
| High Light: |
armored fiber cable,armoured fiber cable |
||
The structure of the GYTC8S cable is to insert a single-mode or multi-mode fiber into a loose tube made of a high modulus polyester material filled with a waterproof compound. The center of the core is a metal reinforcing core. The loose tube (and the filling rope) is twisted around the center reinforcing core into a compact circular core. The gap in the core is filled with water-blocking filler, plastic coated steel strip (PSP). After vertical packing, the steel wire strands are integrated into a figure-eight polyethylene sheath to form a cable. This product is used for self-supporting overhead laying.
Features:
1.Precise control of the excess length of the fiber ensures that the cable has good tensile properties and temperature characteristics;
2.The loose tube material itself has good hydrolysis resistance and high strength;
3.The tube is filled with a special grease to critically protect the fiber;
4.Polyethylene (PE) jackets have good UV radiation resistance.
The following measures are taken to ensure the waterproof performance of the cable:
1- Single wire center reinforcement core
2- The loose tube is filled with special waterproof compound
3- complete core filling
4- Plastic coated steel strip (PSP) against lateral pressure
IEC 60793-1, 60793-2, 60794-1
ITU-T G650, G652
| MFD(1310nm) | 9.2mm±0.4mm |
| MFD(1550nm) | 10.4mm±0.8mm |
| Cladding diameter | 125mm±1.0mm |
| Fiber diameter | 250 ± 15 mm (Colored) |
| Cladding non circularity | £1.0% |
| Cut off wavelength | £1260nm |
| Attenuation coefficient | 1310nm: £0.35dB/km |
| 1550nm: £0.215dB/km | |
| Bending-loss performance of optical fiber | £0.05dB |
| Polarization mode dispersion | £0.1ps/Ökm |
| Zero-dispersion wavelength | 1300 - 1324 nm |
| Zero-dispersion slope | £0.092ps/(nm2•km) |
| Tensile strength | 2850N, conform to IEC 794-1-E1 while fiber strain is ≤0.33% |
| Crush | 2200N/100mm, conform to IEC 794-1-E3 |
| Impact | conform to IEC 794-1-E4 |
| Repeated bending | conform to IEC 794-1-E6 |
| Temperature cycling test | conform to IEC 794-1-F1 |
Each fiber will be identifiable throughout the length of the cable in accordance with the following color sequence. Fiber color in each tube starts from No. 1 Blue.
| Fiber color code | 1 | 2 | 3 | 4 | 5 | 6 |
| Blue | Orange | Green | Brown | Slate | White | |
| 7 | 8 | 9 | 10 | 11 | 12 | |
| Red | Black | Yellow | Violet | Rose | Aqua |
The loose tubes will be identifiable in accordance with the following color sequence, and each tube with 12 fibers. If there are fillers, the color is natural.
| Fiber color code | 1 | 2 | 3 | 4 | 5 | 6 |
| Blue | Orange | Green | Brown | Slate | White | |
| 7 | 8 | 9 | 10 | 11 | 12 | |
| Red | Black | Yellow | Violet | Rose | Aqua |
PACKING:
1 Nominal shipping length of the cable will be 1~2 km. Other length is also available if required by buyer.
2 Each length of the cable will be wound on a separate strong wooden.
3 Both ends of the cable will be sealed with a suitable heat shrinkable cap to prevent the entry of moisture during transportation and storage.
4 The cable end will be securely fastened to the drum to prevent the cable from coming loose during transit or becoming loose during placing operations.
5 Circumference battens will be secured between the outer edges of the flange to protect the cable against damage during shipment and storage.
6 For testing purposes, the inner end of the cable will be recessed into a slot in the drum flange . A minimum length of one meter of cable at the inner end will be accessible.
7 The cable will be shipped on drums designed to prevent damage to the cable during shipment and installation
8 The minimum barrel diameter of the drum will be 30 times to the overall cable diameter.
Are you a trading company or manufacturer?
We are professional supplier. We are not only a trading company but also a manufacturer. Our factory name is Comelink co.,LTD
What are your main products?
Our products cover mainstream brands of OLT and PON cards, ONT ONUs, enterprise switches, optical modules and OEM ODN equipment.
Do ONT ONU products provide customized services?
Yes, we can customize your logo, company information, pre-configuration, packaging box, etc.
What is your delivery time?
Usually we can ship within 1-3 days for small quantity, and about 15-20 days for large quantity.
What are your payment terms?
Alipay, T/T, Western Union and Paypal. This is negotiable.
What is the shipping method?
Shipping by sea, air or express (EMS, UPS, DHL, TNT, FEDEX, etc.).
For OLT, how to ensure quality?
We conduct strict testing before shipment to ensure the goods are available, and electronic reports will also be shared with you. In addition, we also provide one-year warranty and technical service.
How do you make our business a long-term and great relationship?
We maintain good quality and competitive prices to ensure our customers benefit;
We respect every customer as our friend, and we sincerely do business and make friends with them, no matter where they come from.
Is there a minimum order quantity?
No, a test sample is also available.
){kind=link}