| Customization: | Available |
|---|---|
| Application: | Local Communication Cable |
| Conductor Material: | Plastic |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
MTP conversion cable is designed to provide a more flexible multi-fiber cabling system based on MTP products. Unlike MTP harness cables, MTP conversion cables are terminated with MTP connectors on both ends and can provide more possibilities for the existing 8-fiber cabling system.
MTP-12 APC to 2 x MTP-4 APC conversion harness cable, whose MTP-12 connectors only use 8 active fibers to transmit light and 4 inactive fibers not connected and MTP-4 connectors use MTP-12 only 4 active fibers to transmit light and 8 inactive fibers not connected, designed for linking four upcoming 200G NVIDIA InfiniBand OSFP/QSFP56/QSFP112 transceivers to 800G NVIDIA InfiniBand twin-port OSFP transceiver transmission.
Compared to purchasing and installing separate conversion cassettes, using MTP conversion cables is more cost-effective and has lower loss.
Please note: The US Conec MTP connectors are fully compliant with the MPO standards, achieving higher performance levels when compared to generic MPO connectors
US Conec MTP Connector with Optimal 0.35dB Low Insertion Loss
Corning Bend Insensitive Fiber with 7.5mm Min. Bend Radius
Plenum (LSZH) Flame Rating
Compliant to IEC-61754-7 and TIA-604-5 (FOCIS-5)
Provide Conversion from 12 to 4 Fibers Connectivity for 100% Utilization of Fibers
| Connector A | MTP Female (Pinless) | Connector B | MTP Female (Pinless) |
| Fiber Mode | OM4 50/125μm | Wavelength | 850/1300nm |
| 400G Ethernet Distance | 50/100m at 850nm | 800G Ethernet Distance | 50m at 850nm |
| Glass Fiber | Corning ClearCurve | Polish Type | APC to APC |
| Insertion Loss | 0.35dB Max (0.15dB Typ.) | Return Loss | ≥20dB |
|
Attenuation at 850nm
|
≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Cable Jacket | Plenum (OFNP) |
Minimum Bend Radius
|
7.5mm |
| Jacket OD | 3.0mm | Breakout Length | 0.5m |
| Installation Tensile Load | 66N | Tensile Strength (Long/Short Term) | 60/120N |
| Operating Temperature | -10 to 60°C (14 to 140ºF) |
Storage Temperature
|
-40 to +85°C (-40 to 185ºF) |
Q: Can 9/125 and 8.3/125 jumpers be used together? Is there a big difference between them?
A:8.3 and 9 refer to the fiber diameter of the fiber jumper, and 125 is the diameter of the jumper. The single-mode optical fiber provided by FS is 9/125, which is in line with international standards, and 8.3/125 is non-standard. If the two are used together, theoretically, there will be light leakage, and the loss will be relatively large, so it is not recommended to use them together.
Q: Do you have fiber optic cables with built-in attenuation?
A: The standard products on the official website do not have optical fibers with built-in attenuation. You can contact us to further communicate about the details of the product and provide you with customized services.
Q: Do you conduct reliability testing during production? What reliability testing items will be involved?
A: Hello, during the product development and production stages, reliability testing will be conducted based on the relevant standards of IEC61300-2. Reliability projects include temperature cycle, high temperature and humidity, plugging and unplugging durability, and mechanical impact, etc., to ensure that product reliability meets the requirements. If you need to know more, please contact us.
Q: Does this cable work in a 1G installation?
A: Yes, it will work in a 1G installation. It supports 1000BASELX, etc
){kind=link}