Kexint IP55 Iron Sheet Two-Room Communication Outdoor Cabinet

• Customization: Available
• Type: Optical Fiber Distribution Box
• Wiring Devices: ODF
• Model NO.: KXT-ODC2
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Transport Package: 2100*1700*900
• Specification: 2100*1700*900
• Trademark: KEXINT
• Origin: Shenzhen, China
• Package Size: 145.00cm * 75.00cm * 54.00cm
• Package Gross Weight: 150.000kg

Product Description

Product Description

Outdoor cabinets refer to cabinets that are directly under the influence of natural climate and are made of metal or non-metallic materials. Unauthorized operators are not allowed to enter and operate. It provides an outdoor physical working environment and safety system for wireless communication sites or wired network site workstations.

It is suitable for cabinets installed in outdoor environments, such as roadsides, parks, roofs, mountainous areas, and flat grounds.

Base station equipment, power equipment, batteries, temperature control equipment, transmission equipment and other supporting equipment can be installed in the cabinets or reserved for installation of the above equipment The space and heat exchange capacity can provide reliable machinery and environmental protection cabinets for the normal operation of internal equipment.

 

Product materials:

     1. Use hot-dip galvanized sheets with a thickness greater than or equal to 1.5mm for the panels used to manufacture the exterior of the cabinet body. After the hot-dip galvanized sheets are welded, they must be sprayed with outdoor powder.
         The cabinet with heat-dissipating temperature control device adopts hot-dip galvanized sheet as the plate, and the cabinet with refrigerating temperature control device adopts hot-dip galvanized sheet greater than or equal to 1.5mm plus 10mm insulation cotton as the plate.
         The base of the cabinet is made of cold-rolled steel plate with a thickness of not less than 2mm, and the surface is treated with hot-dip galvanizing after welding.

   2. The metal materials used in the cabinet should have the ability to resist corrosion and electrochemical reactions after or without surface treatment.

   3. Non-metallic parts (including insulated wires, cables and foam materials) should be flame-retardant materials, and their flammability should be able to pass the flame-retardant test requirements.

 

Features

1.The product is durable, anti-corrosion, and has a service life of 15 years.

2. Flexible and diverse product configuration

3. Integrated temperature control system (fan, heat exchanger or air conditioner)

4. High protection grade, protection grade reaches IP55.

5. EMC/RFI protection.

6. Noise reduction processing.

7.Using electrophoresis plus special outdoor powder to enhance outdoor corrosion resistance and UV resistance.

8. The main equipment, temperature equipment and wiring modules in the cabinet are designed to be divided into compartments, which is convenient for future graded maintenance.

9. Anti-theft design, high anti-damage coefficient.

10. Anti-seismic.

11. Integrated electrical wiring and AC/DC power distribution system.

 

Manufacturing process

Exterior

The coating surface should be continuous and uniform, and the texture should be consistent with the corresponding standard template, and there should be no nodules, shrinkage, blistering, pinholes, cracks, peeling, chalking, particles, sagging, bottoming, inclusions and other defects .

For cabinets without spray treatment, the gloss and texture of the outer surface should be uniform and beautiful.

Adhesion

After the adhesion test, the coating on the surface of the cabinet meets the requirements of level 1 in Table 1 of GB/T 9286-1998.

Impact resistance

After the impact resistance test, the coating on the surface of the cabinet has no defects such as radial cracks and nicks.

Anti-aging

The coating on the surface of the cabinet is anti-aging.

Solvent resistant

After the coating on the surface of the cabinet has been tested for solvent resistance, the surface should be visually inspected and there should be no signs of loss of gloss, obvious discoloration, or being wiped.

 

Composition of outdoor integrated cabinet

 

Equipment warehouse: The equipment warehouse is distributed on the right side of the cabinet, and is separated from the battery warehouse with a partition to facilitate the insulation of the equipment space.

       
Storage battery: used to install storage battery, the outer plate of the cabinet is pasted with insulation cotton to achieve the thermal insulation effect. The battery cabinet is also equipped with a sunshade to achieve the effect of sun protection and waterproofing. The cabinet is equipped with an exhaust device, which can release the hazardous gas produced by the battery.

       
Door and door lock: The cabinet door adopts built-in structure, and the gap between the door is tight. The door opening angle is >110°, the cabinet door has a limit structure, and the door limit device has a limit function when the door is in the "open" state.

The door lock adopts a three-point structure with a pull rod and a locking piece, and a padlock can be added. Firm structure, strong anti-theft. Each cabinet door is equipped with a door open alarm sensor to cooperate with environmental monitoring.

 

Technical parameters of outdoor integrated cabinet:

1. The cabinet has the characteristics of dustproof, sunproof, rainproof, etc., and it is fully adapted to the outdoor environment.

2. The equipment warehouse cabinet adopts ventilation and heat dissipation, and a heat exchanger can be used as the heat dissipation device.

3. The battery cabinet adopts semiconductor cooling method.

4. The cabinet has power and environmental monitoring functions, which can realize and upload alarms such as power failure, power failure, access control, temperature, humidity, smoke, water, and battery voltage.

5. The cabinet layout is reasonable, the operation of cable introduction, fixing and grounding is convenient, and the maintenance is convenient. Power cables, signal cables, and optical cables have independent entry holes, which will not interfere with each other.

6. The cables used in the cabinet are made of flame-retardant materials.

7. The cabinet is assembled on site.