Customization: | Available |
---|---|
Communication Mode: | Full-Duplex & Half-Duplex |
Type: | AC Power, Back-to-Front Airflow |
Still deciding? Get samples of US$ 1800/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The SC9405 switch supports a maximum of 144x 1G/10G, 96x 25G, or 24x 40G/100G high-density full line rate ports through flexible line cards combinations of SC9400-48F-E, SC9400-48S-E and SC9400-8C-E. SC9405 switch is a multi-service core switch that adopts cutting-edge Broadcom chips to deliver 4800 Gbps switching capacity and 3571 Mpps forwarding rate. The switch supports virtual stacking, which simplifies the network architectures of customers to improve O&M efficiency. It is packed with redundant hot-swappable power supplies, one hot-swappable smart fan, and a hardware-level dual-flash chip for superior processing performance and network reliability. FS SC9405 switch integrates rich features of enterprises and data centers, ideal for MAN (Metropolitan Area Network), campus network, and data center scenarios based on service requirements.
Number of Line Card Slots | 3 | MTBF | >200,000 Hours |
Number of Engine Slots | 2 | Dimensions (HxWxD) | 6.9''x17.4''x17.8'' (175x442x451mm) |
Max. 100G Ports | 24 | Switching Capacity | 4800 Gbps |
Max. 40G Ports | 24 | Forwarding Rate | 3,571 Mpps |
Max. 25G Ports | 96 | Flash Memory | 1GB |
Max. 10G Ports | 144 | MAC Address | 4K |
Max. 1G Ports | 144 | Jumbo Frame | 9K |
Hot-swappable Power Supplies | 2 (1+1 Redundancy) | Operating Temperature | 0 to 50°C (32 to 122°F) |
Hot-swappable Fans | 1 | Max. Power Consumption |
Support line-rate IPv4/IPv6 dual-stack multi-layer switching
Support static routing, RIPv1/v2, OSPFv2, IS-IS, BGP4, RIPng, OSPFv3, IS-ISv6 and BGP4+
Up to 2 units stacking
Simplified network topology
Fault recovery within milliseconds
Hot swap without affecting normal operation of other devices
Support hardware-based IPv6 ACLs
Support hardware CPU protection mechanism
Support the IP-based Telnet access control
Support the Secure Shell (SSH) and SNMPv3
Support Network Foundation Protection Policy (NFPP)
Support the Spanning Tree Protocols (IEEE802.1d STP, IEEE802.1w RSTP, standard 802.1s MSTP)
Support Virtual Router Redundancy Protocol (VRRP)
Support Rapid Link Detection Protocol (RLDP)
Support Rapid Ethernet Uplink Protection Protocol (REUP)
Support GR perfect restart, BFD fast forwarding detection and other mechanisms
Support modular power redundancy
Support the IPv4 and IPv6 multicast functions
Support IGMP snooping, IGMP, MLD, PIM, MSDP
Support IGMP source port and source IP check function
Support SNMP (SNMPv1,v2c,v3), RMON, OAM and Syslog
Support Telnet, SSHv1/v2
Support In-band Network Telemetry (INT)